Tank Base

  • PITTCOURSE™ 100 High Performance Damp Proof Course

    A damp proof course (DPC) to be used in conjunction with FOAMGLAS® HLB Insulation on cold and cryogenic tank bases. PITTCOURSE™ 100 DPC consists of a modified bituminous compound reinforced with a polyester base, and finished with fine silica sand.

     

    Service Temperature Limits
    -180° to 65°C
    -292 to 149°F

     

    U.S. Stock Item. Available in standard 1 meter x 8 meter rolls (30 / pallet).

    Product data sheet PITTCOURSE™ 100 PDS.pdf
    Safety data sheet PITTCOURSE™ 100 SDS.pdf

     

    E.U. Stock item. Available in standard 1 meter x 8 meter rolls (30 / pallet).

    Product data sheet PITTCOURSE™ 100 PDS.pdf
    Safety data sheet PITTCOURSE™ 100 SDS.pdf

     

  • PITTCOURSE™ DPC Jointing Tape

    PITTCOURSE™ DPC Jointing Tape is a modified-acrylic double-sided self-adhesive, reinforced with a specially designed scrim for bonding of PITTCOURSE™ 100 High Performance Damp Proof Course lap joints in cold and cryogenic tank base applications.

     

    Forget the torch and the messy adhesive compounds, PITTCOURSE™ DPC Jointing Tape makes installation safe, efficient, and neat.

     

    U.S. Special Order Item. Available in standard 75 mm x 25 meter rolls (3 / box).

    Product data sheet PITTCOURSE™  Jointing Tape PDS.pdf
    Safety data sheet PITTCOURSE™ Jointing Tape SDS.pdf

     

    E.U. Special Order Item. Available in standard 75 mm x 25 meter rolls (3 / box).

    Product data sheet PITTCOURSE™ Jointing Tape PDS.pdf

     

  • PC® 85 Powder

    A mineral-based inorganic powder that has been formulated for filling open surface cells of cellular glass when used in liquid oxygen, liquid nitrogen, and hot tank base insulation. It is used with appropriate interleaving materials to achieve the desired weight load distribution under EN 826 or ASTM C240 testing conditions.

     

    Service Temperature Limits
    -200 to 350°C
    -328 to 662°F

     

    E.U. Stock item. Available in standard 25 kg bags.

    Product data sheet PC® 85 Powder PDS.pdf
    Safety data sheet PC® 85 Powder SDS.pdf
  • PC® 500 Adhesive

    A single component bituminous adhesive with low solvent content and a high content of extenders. It retains long-term flexibility, does not freeze, and is thixotropic.

     

    Service Temperature Limits
    -30 to 80°C
    -22 to 176°F

     

    U.S. Special Order Item. Available in standard 25 kg pails.

     

    E.U. Stock item. Available in standard 25 kg pails.

    Product data sheet PC® 500 Adhesive PDS.pdf
    Safety data sheet PC® 500 Adhesive SDS.pdf

     

  • PITTCOTE® TB Primer

    A low VOC cut-back asphalt of a thin brush, roll or spray consistency. When applied, the material will be minimally tacky and exhibit a dark black color. This product is typically used to prime porous and prepared substrates. By applying this primer, substrates will be made smoother and more compatible for applying PITTCOURSE™ 100 High Performance Bitumen Damp Proof Course (DPC). The priming of these surfaces creates a greater surface area contact which results in maximized points of contact for the DPC.

     

    U.S. Stock Item. Available in standard 4.7 gallon pails.

    Product data sheet PITTCOTE® TB Primer PDS.pdf
    Safety data sheet PITTCOTE® TB Primer SDS.pdf

     

 
 

Product packaging and labeling may differ according to regional standards and regulations.

 

Posted datasheets are the most recent revision.  Contact Us to request previously published datasheets.

 
 
 

What's New?