Sealants

  • PITTSEAL® 444NS Sealant

    A specially formulated butyl compound used for sealing joints in FOAMGLAS® insulation systems, and to seal protrusions and metal jacket laps.

     

    Meets the stainless steel service requirements of MIL-I-24244 and NRC Regulatory Guide 1.36.

    Certified to meet the general requirements for VOC emissions of LEED IEQc4.1 2009 and SCAQMD Rule 1168, July 1, 2005, Adhesive and Sealant Applications, as analyzed by the methods specified in Rule 1168.

    Service Temperature Limits:
    -150 to 83°C
    -238 to 180°F

     

    U.S. Stock Item. Available in standard 5 gallon pails and 10 ounce cartridges (12 / Case).

    Product data sheet PITTSEAL® 444NS Sealant PDS.pdf
    Safety data sheet PITTSEAL® 444NS Sealant SDS.pdf

     

  • PITTSEAL® 444N Sealant

    A specially formulated, single component, non hardening, butyl sealant used for sealing joints in FOAMGLAS® insulation systems and to seal protrusions and metal jacket laps.

     

    PITTSEAL® 444N adheres to FOAMGLAS® cellular glass insulation and many other surfaces such as steel, concrete, wood etc.

     

     

     

    E.U. Stock Item. Available in standard 30 kg pails and 310 ml cartridges (12 / Case)

    Product data sheet PITTSEAL® 444N Sealant PDS.pdf
    Safety data sheet PITTSEAL® 444N Sealant SDS.pdf

     

  • PC® RTV 450 Silicone Adhesive

    A one part, neutral cure, silicone adhesive / sealant formulated for use at high temperatures. It is particularly suited for use in conjunction with insulations which require adhering or sealing to itself or hot surfaces. It cures to an elastomeric solid at room temperatures.

     

    Service Temperature Limits:
    -100 to 204°C, 232°C intermittent
    -148 to 400°F, 450°F intermittent

    VOC Compliant. Meets the general requirements for VOC emissions of SCAQMD Rule 1168, July 1, 2005 adhesive and sealant applications, as analyzed by the methods specified in Rule 1168.

    Meets the stainless steel service requirements of MIL-I-24244.

     

    U.S. Stock Item. Available in standard 10.3 ounce cartridges (12 / case).

    Product data sheet PC® RTV 450 Adhesive PDS.pdf
    Safety data sheet PC® RTV 450 Adhesive SDS.pdf

     

  • PC® HI-TEMP / RTV Silicone Adhesive

    A one part, neutral cure, silicone adhesive / sealant formulated for use at high temperatures. It is particularly suited for use in conjunction with insulations which require adhering or sealing to itself or hot surfaces. It cures to an elastomeric solid at room temperatures.

     

    Service Temperature Limits:
    -150 to 260°C, 343°C intermittent
    -238 to 500°F, 650°F intermittent

    VOC Compliant. Meets the general requirements for VOC emissions of SCAQMD Rule 1168, July 1, 2005 adhesive and sealant applications, as analyzed by the methods specified in Rule 1168.

     

    U.S. Stock Item. Available in standard 10.3 ounce cartridges (12 / case).

    Product data sheet PC® Hi-Temp RTV Adhesive PDS.pdf
    Safety data sheet PC® Hi-Temp RTV SDS.pdf

     

    E.U. Stock Item. Available in standard 305 ml cartridges (12 / case).

    Safety data sheet PC® Hi-Temp RTV SDS.pdf

     

  • PITTSTOP™ 196 Vapor Stop

    PITTSTOP™ 196 Vapor Stop is a two component, butyl rubber elastomer specially designed for use in FOAMGLAS® insulation systems. Its service temperature range is specifically suited for Liquid Natural Gas and other cryogenic insulation systems.

     

    Service Temperature Limits:

    -196°C to 121°C
    -320°F to 250°F

     

    U.S. Stock Item. Available in standard two component 10 gallon (37.8 L) kits.

    Product data sheet PITTSTOP™ 196 Vapor Stop PDS.pdf
    Safety data sheet PITTSTOP™ 196 Vapor Stop (Part B) SDS.pdf PITTSTOP™ 196 Vapor Stop (Part B) SDS.pdf
    PITTSTOP™ 196 Vapor Stop (Part A) SDS.pdf PITTSTOP™ 196 Vapor Stop (Part A) SDS.pdf

     

     

    Special order. Available in 110 gallon (416 L) kits.

  • PITTSEAL® CW Sealant

    A high performance, MS polymer-based sealant that is specifically formulated for FOAMGLAS® insulation systems in chilled water service. PITTSEAL®CW sealant offers the advantages of both silicone and polyurethane sealants in one product, without the disadvantages of either. It is UV resistant, paintable, and has excellent adhesion and durability. PITTSEAL®CW sealant requires no primer and is compatible with a wide variety of coatings.

     

    Service Temperature Limits
    -59 to 104°C
    -75 to 22°F

    VOC Compliant. Meets the general requirements for VOC emissions of SCAQMD Rule 1168, July 1, 2005 adhesive and sealant applications, as analyzed by the methods specified in Rule 1168.

     

    U.S. Stock Item. Available in 2 gallon pails and 10.3 ounce cartridges (12 / Case).

    Product data sheet PITTSEAL® CW Sealant PDS.pdf
    Safety data sheet PITTSEAL® CW Sealant SDS.pdf

     

    E.U. Stock Item. Available in 7.6 liter pails and 305 ml cartridges (12 / Case).

    Product data sheet PITTSEAL® CW Sealant PDS.pdf
    Safety data sheet PITTSEAL® CW Sealant SDS.pdf

     

  • TEROSTAT PC® FRi Coating-Sealant-Adhesive

    A silicone-based, single-component coating, sealant and adhesive which cures by reaction with humidity. It is odorless, free of solvents, isocyanates and PVC.

     

    It provides good weathering, UV and mechanical resistance, as well as excellent chemical resistance, and is classified as a flame retardant coating and sealant (Class O as per BS476).

     

    VOC Compliant, Solvent free, No Isocyanurates.

     

    E.U. Stock Item. Available in 300 ml cartridges (12 / Case).

    Product data sheet Terostat PC® FRi Coating PDS.pdf
    Safety data sheet Terostat PC® FRi Coating SDS.pdf
 
 

Product packaging and labeling may differ according to regional standards and regulations.

 
 
 

What's New?