Jacketing

  • PITTWRAP® HS Jacketing

    A heat sealable multiple laminate for protecting underground FOAMGLAS® insulation for outer surface temperatures below 88°C (190°F). It consists of three layers of a polymer modified bitumen compound separated by glass fabric reinforcement and aluminum foil. An outer layer of polyester film is laminated to the bitumen compound. A release paper prevents sticking in the roll before use.

     

    Service Temperature Limits
    -7 to 88°C
    20 to 190°F

    Recommended for underground / direct buried pipelines including shallow buried water service pipelines, above ambient service pipelines, commercial chilled water and cold service applications. Preferred for situations where wet soil is the norm. Not intended for indoor use.

     

    U.S. Stock Item. Available in standard 24 in x 50 ft rolls with butt strip, 4 in x 50 ft butt strips and 48 in x 25 ft rolls.

    Product data sheet PITTWRAP® HS Jacket PDS.pdf
    Safety data sheet PITTWRAP® (HS) Jacket SDS.pdf

     

  • PITTWRAP® SS Jacketing

    A 1.78 mm (70 mil) thick self-sealing modified bitumen membrane for protecting underground FOAMGLAS® insulation systems with outer temperatures below 77°C (170°F). Manual pressure seals the jacket without the use of a torch or heater. It may also be factory applied on the insulation by a fabricator. PITTWRAP® SS jacketing consists of a polymer modified bitumen compound reinforced with a glass fabric, a 0.03 mm (1 mil) aluminum top film, and a release paper backing.

     

    Service Temperature Limits
    -32 to 77°C
    -25 to 170°F

    Recommended for underground / direct buried pipelines including shallow buried water service pipelines, above ambient service pipelines, commercial chilled water and cold service applications. Ideal for installations where torches are not allowed. Not intended for indoor use.

     

    U.S. Stock Item. Available in standard 24 in x 50 ft rolls with butt strips, 24 in x 100 ft rolls, 4 in x 50 ft butt strips and 4 in x 100 ft butt strips.

    Product data sheet PITTWRAP® SS Jacket PDS.pdf
    Safety data sheet PITTWRAP® SS Jacket SDS.pdf

     

  • PITTWRAP® SS Primer

    A specially formulated primer that promotes adhesion of the PITTWRAP® SS Jacketing when the laps are slightly dusty or the application is below 10°C (50°F).

     

    U.S. Stock Item. Available in standard 1 gallon containers.

    Product data sheet PITTWRAP® SS Primer PDS.pdf
    Safety data sheet PITTWRAP® SS Primer SDS.pdf

     

  • PITTWRAP® CW PLUS Jacketing

    A 1.27mm (50 mil) thick self-sealing modified bitumen membrane for protecting underground FOAMGLAS® insulation on chilled water and hot service pipelines. Manual pressure seals the jacket without the use of a torch or heater. It may be factory applied by a fabricator or field applied by the insulation contractor.

     

    Service Temperature Limits
    -32 to 60°C
    -25 to 140°F

    Recommended for underground / direct buried pipelines including shallow buried water service pipelines, commercial hot and chilled water and cold service applications. Ideal for installations where torches are not allowed. Not intended for indoor use.

     

    U.S. Stock Item. Available in standard 24 in x 75 ft rolls and 4 in x 75 ft butt strips.

    Product data sheet PITTWRAP® CW PLUS Jacket PDS.pdf
    Safety data sheet PITTWRAP® CW PLUS Jacket SDS.pdf

     

  • PITTWRAP® IW50 Jacketing

    A 1.27 mm (50 mil) thick self-sealing, modified bituminous membrane for protecting above ground FOAMGLAS® insulation systems under a metal or UV resistant jacket finish. Manual pressure seals the jacketing without the use of a torch or heater. Jacketing may be factory or field applied to the insulation.

     

    Service Temperature Limits:
    -20 to 75 °C
    -4 to 167 °F

    Ideal for use where insulation has been roller coated with asphalt prior to jacketing.

     

    U.S. Stock Item: Available in standard 36 in. x 75 rolls.

    Product data sheet PITTWRAP® IW50 Jacket PDS.pdf.pdf
    Safety data sheet PITTWRAP® IW50 Jacket SDS.pdf
  • PITTWRAP® B100 Aluminum-Butyl Wrap

    PITTWRAP® B100 wrap is a 1.2 mm (47 mil) thick self-sealing, aluminum butyl laminate specially formulated for protecting FOAMGLAS® insulation systems. PITTWRAP® B100 wrap is built with a high-tack butyl adhesive and 3-layer film - an aluminum film laminated to two polyester films (top and bottom) - to assure high level of resistance and protection (puncture, tear resistance). The polyester layers also protect the aluminum face against corrosion. A protective jacketing must be used over the PITTWRAP® B100 butyl wrap for UV protection. Manual pressure seals the wrap without the use of a torch or heater.

     

    Service Temperature Limits
    -50 to 140°C
    -58 to 284°F

    Recommended for above and below ambient service pipelines and equipment; commercial chilled water; freeze-thaw protection on LNG, cold and cryogenic service applications. Not intended for below ground or indoor use.

     

    U.S. Stock Item. Available in standard 1 m x 15 m (39.4 in x 42.2 ft) and 0.6 m x 15 m (23.6 in x 42.2 ft) rolls.

    Product data sheet PITTWRAP® B100 Jacket PDS.pdf
    Safety data sheet PITTWRAP® B100 Jacket SDS.pdf

     

    E.U. Stock Item. Available preapplied or in standard 0.6 m x 15 m and 0.1 m x 15 m rolls.

    Product data sheet PITTWRAP® B100 Jacket PDS.pdf
    Safety data sheet PITTWRAP® B100 Jacket SDS.pdf

     

  • PITTWRAP® IW30 Jacketing

    A 0.76 mm (30 mil) thick self-sealing non-metallic sheet for protecting above ground FOAMGLAS® insulation for chilled water and hot service under a metal jacket. Manual pressure seals the jacketing without the use of a torch or heater.

     

    Service Temperature Limits
    -32 to 38°C
    -25 to 100°F

    Recommended for ambient and below ambient service pipelines, and commercial chilled water. Not intended for below ground or indoor use.

     

    U.S. Stock Item. Available in standard 36 in x 100 ft rolls and 4 in x 100 ft butt strips.

    Product data sheet PITTWRAP® IW30 Jacket PDS.pdf
    Safety data sheet PITTWRAP® IW30 Jacket SDS.pdf

     

  • PITTWRAP® CF Jacketing

    PITTWRAP® CF jacketing is a cellulose free fiberglass reinforced vapor retarder insulation jacketing. It consists of a 28 μm (1.1 mil) thick white polypropylene film reinforced with a fiberglass scrim and laminated to a 12μm (0.5mil) thick aluminized polyester film (bottom) to assure high level of resistance and protection (puncture and tear resistance).

     

    Service Temperature Limits
    -40 to 104°C
    -40 to 220°F

    Recommended for protecting above ground indoor FOAMGLAS® insulation systems on chilled water and other moderate temperature service pipelines.

     

    U.S. Stock Item. Available in standard 23.5 in x 600 ft rolls and 3 in x 150 ft butt strips.

    Product data sheet PITTWRAP® CF Buttstrip PDS.pdf PITTWRAP® CF Buttstrip PDS.pdf
    PITTWRAP® CF Jacketing PDS.pdf PITTWRAP® CF Jacketing PDS.pdf
    Safety data sheet PITTWRAP® CF Buttstrip SDS.pdf PITTWRAP® CF Buttstrip SDS.pdf
    PITTWRAP® CF Jacketing SDS.pdf PITTWRAP® CF Jacketing SDS.pdf

     

  • PITTWRAP® CF Tape

    Companion tape for use with PITTWRAP® CF Jacketing.

     

    U.S. Stock Item. Available in standard 1.5 in x 200 yard rolls.

    Product data sheet PITTWRAP® CF Tape PDS.pdf

     

 
 

Product packaging and labeling may differ according to regional standards and regulations.

 

Posted datasheets are the most recent revision.  Contact Us to request previously published datasheets.

 
 
 

What's New?